Winders: 
Spulmaschinen

Specification:

30 spindles, 6” traverse, 2gg cylindrical tubes, conical also possible, Autospeed, thermosplicers, waxing device, Loepfe clearer Yarnmaster with sensors TK940F, automatic feeding station for copses length 180 until 280 mm, and cops diameter 32 until 72 mm,  doffer for cones, conveyor, overhead cleaner, very good condition, still in running position

Specification:

30 spindles, 6” traverse, 2gg cylindrical tubes, conical also possible, Autospeed, thermosplicers, waxing device, Loepfe clearer Yarnmaster with sensors TK940F, automatic feeding station for copses length 180 until 280 mm, and cops diameter 32 until 72 mm, doffer for cones, conveyor, overhead cleaner, very good condition, still in running position                       

Specification:

overhauled in  2018, for coarse yarn counts,tubes until 450 mm length, 24 spindles, 8” traverse,conical tubes 3°30, length 230 mm, meter counter, splicer, electronic clearer Loepfe type TK 770 for Nm 1 – 22,Loepfe Yarnmaster control, individual programming of individual spindles,so that different yarns can be wound on the machine at the same time,second motor for section drive of 8 spindles. pocket magazines for 5 cops, diameter 86mm x 450 mm length, automatic doffer 

Specification:

 Gilbos, ca. 1972, type GF10J, 1 spindle 10” ,                               cylindrical tubes 280-290 mm, with meter counter,                               with pneumatic BEX-Expanders Gilbos, for Jumbo-hanks until 6 kg, circumference 1,20-2,80 m

Specification:

Rite, type DPS, year 1985, 21 spindles, 6”= 150mm traverse, tubes 5°57, 170mm length for hanks 1,20-1,80m circumference, waxing device

Specification:

Hirschburger, type SE 250 S, 1969                                                              16 spindles, 10‘ traverse = 250mm, tubes 280mm, 3°30, for hanks 1,50-2,00m circumference, until 1.000g waxing device

Specification:

Saurer Allma, year 1976, type Allmat DZ EESX 150/450,2 x 16 spindles, pitch 150 mm, ring-Ø113 mm, tubes 450 mm, 3 cylinders each side, outstanding creel each side 

Specification:

type MKC-30, for Nm 2-50,
consisting
1 control, 14 sensors, 13 electronic boards for Autoconer 238

Specification:

1988, type RCX10NG, 16 spindles 10”,tubes 1°50, 280 mm,splicer, Loepfe clearer TK680 for Nm 0,8 - 10S-magazins for winding from cone to cone   until diameter 350 mm,1doffer carts for doffing full cones,1 overhead cleaner Jacobi,380V/3Ph/50Hz

Specification:

1             precision winder : Präzisionsspulmaschine Dietze & Schell, ca. 1975, 2 spindles, 7“ traverse, cylindric tubes 200 mm, inside dia. 16 mm

Specification:

With special Thermoelement for splicing wool yarn, (2 splicer each section), 2 conechanger,Uster clearer D4-MK C 20 A2, magazin feeding, still running, very good condition

Specification:

72 x 290 mm, for cylindric cones, until 400 mm diameter, traverse by yarn gides and exenter gearboxVerdol, speed 10-80 m/min by inverter

Specification:

Gilbos, year 1984-1992, for GF10, 10'' with excenter, traversearm + 2 feeding roller

Specification:

Keisokki, for autoconer 238 with 50 spindles complete with controlbox KC-60 EX andAWE 146.907 457 D

Specification:

Uster, for autoconer 238 with 50 spindles complete with controlbox UAM/DS andAWE 146-655 133 Da

Specification:

Gilbos, for Jumbo hanks until 5,- kg,circumference until 2800 mm

Specification:

For 4'' 1 ½ gg for tubes 120-125 mm length including all needed change parts for 4'' traverse

Specification:

For flansh and cops bobbins for Prafilmachines