–
Specification:
Krantz, Germany 1961, general overhauled ca. 2005
for loose fibres, bumps and cones, temperature 130°C, capacity 1.500l, 40-80 kg wool or synthetics, with secondary tank for preparing dye and water level control, small dye unit for color matching
2 carriers for loose fibres 40-80kg
automatic temperature control
–
Specification:
Henriksen/Denmark, 1986/2020 and 1971/2020, for bumps and cones, type GRU 15 HT, temperature 140°C, capacity 420 l, 20-50 kg wool or synthetics, refurbished in 2020,
1 carrier for cones, with automatic temperature control
Datex Touch 240, year 2020, Becatron/Switzerland
–
Specification:
Henriksen/Denmark, 1986/2020 and 1971/2020,
for bumps and cones, type GRU 5 HT, temperature 140°C,
capacity 158 l, 5-15 kg wool or synthetics, refurbished in 2020,
1 carrier for cones, with automatic temperature control
Datex PICO II, year 2020, Becatron/Switzerland
–
Specification:
Ahiba Turbostat, ca. 1995, with 6 dye positions, electric heating with oil, temperature until 135°C, temperature control Becatron type Datex Pico XL
–
Specification:
Jagri, 1973, 116 l, 5 BAR, 143°C,
+ 2 separate tanks + 1 sample sluice, dimension of dyeing machine: inside: diameter 450 mm x 650 mm high, dye carrier inside: diameter 430 mm x 270 mm high, suitable for stock- and top dyeing 1-10 kg, pneumatic valves, pump, 380V/3Ph/50HZ
–
Specification:
MWZ/Germany, year 1987, type WST 5010, little used, for temperature 0-240°C, 1,25 kW, 220V, dimension of inside cabinet width 420 mm, depth 350 mm, height 300 mm
–
Specification:
suitable for Stalam high frequency dryer 30 kW, only ca. 300 hours used,
(new price EUR 7.000,-)
–
Specification:
400 x 700 x 500 mm, bis 200°C, 220 V
–
Specification:
with 8 pots dia. 80 x 120 mm high, for wash test and dyeing temperatur until 100°C.
–
Specification:
1974, with 6 dye positions with 6 pumps, electric heating,
temperature until 135°C,
including 1 sample winder for winding the small bobbins
Heine, 1953, diameter 1.200 mm x high inside 550 mm
Specification:
Heine, 1953, diameter 1.200 mm x high inside 550 mm,380V/3Ph/50Hz
–
Specification:
Lab dyeing machine: LaborfärbemaschineScholl, for hanks 1-2 kg,capacity 70l, with pump and separat tank,stainless steel diameter 700 mm
Then, year 1970
Specification:
Then, year 1970, low pressure type suitable until 105°C, length 2600, width 1250 mm, high1850 mm for 100-150 kg hanks, with 2 hank carriers
Fabr. Chem Tec, year 1990
Specification:
Fabr. Chem Tec, year 1990
Fabr. Chem Tec, year 1990
Specification:
Fabr. Chem Tec, year 1990
Fabr. Chem Tec, year 1990
Specification:
Fabr. Chem Tec, year 1990
Tremöhlen, year 1968, type KAM, 2 conveyor
Specification:
Tremöhlen, year 1968, type KAM, 2 conveyor
Fabr. Hirche, Germany, same principle as Obermaier and Krantz, ca. 1965
Specification:
Fabr. Hirche, Germany, same principle as Obermaier and Krantz, ca. 1965, Atmospheric system, for 8-15 kg, 1 carrier for hanks, with temperature control,Electric control box ca. 2002,Still in working position
VEB-Dental, for temperatures until 240°C, electr. Heating
Specification:
VEB-Dental, for temperatures until 240°C, electr. Heating,1250 W, 220 V, thermostat,Dimensions outside: 40 x 48 x 52 cm, inside: 31 x 35 x 35 cm
Muvek, until 300°C
Specification:
Muvek, until 300°C, like new, electr. Heating 380 V, 4,4 kW, size of heating box inside: width1.200 mm, deap 500 mm, high 720 mm
Fleissner, for wet material, ww 1200 mm, with V4A needle lattic, for feeding dryer
Specification:
Fleissner, for wet material, ww 1200 mm, with V4A needle lattic, for feeding dryer
Autefa, year 1973, type 231-19, ca. 6 to., 5,5 kW
Specification:
Autefa, year 1973, type 231-19, ca. 6 to., 5,5 kW
Autefa, year 1973, type 231-21, ca. 10 to., 5,5 kW
Specification:
Autefa, year 1973, type 231-21, ca. 10 to., 5,5 kW
Autefa, year 1981, type 232-17, ca. 13 to., 7,5 kW
Specification:
Autefa, year 1981, type 232-17, ca. 13 to., 7,5 kW
Hanau, year ca. 1980
Specification:
Hanau, year ca. 1980, type Linitest, for 8 dyeing bombs (small boxes V4A) for samples 5-50 gr,Temperature until 150°C, electric heating
Fabr. Gesellschaft für Labortechnik
Specification:
Fabr. Gesellschaft für Labortechnik, type GFL3005 for 12 glascups, shakefrequence 190 m/min
Like position W152, with tanks, meter-cylinder-stations and pumps
Specification:
Like position W152, with tanks, meter-cylinder-stations and pumps
With 5 polyethylen-tanks
Specification:
With 5 polyethylen-tanks with level control and scale for content, 250 ltr., 4 meter-cylinders 25 ltr.,1 meter cylinder 50 ltr., electric control, pipes and valves
Stainless steel V4A, for stock dying in packing cylinders,
Specification:
Stainless steel V4A, for stock dying in packing cylinders,Diameter 1.220 / 510 x 5 mm with 4 chains
Alfa Laval, year 1980
Specification:
Alfa Laval, year 1980, Nirosta-steel V4A no. 4571, 6/8 bar, 2 ½'', capacity 40 cbm/h, 80°C,Condition like new
Krantz, year 1987
Specification:
pneumatic press for pressing Biko cones to carriers before dyeing
For water, 6.000 ltr., 6 bar, on feet, year 1979
Specification:
For water, 6.000 ltr., 6 bar, on feet, year 1979
–
Specification:
–
Autefa, type 6 76, serial-no. 6394, year 1980
Specification:
Autefa, type 6 76, serial-no. 6394, year 1980, for pressing/stamping loose fibres in dye-cylinder,High until 1.500 mm, diameter until 1.600 mm