HKN TEXTILE MACHINES

TRADE  I  SALE  I  SECOND HAND

Home  I   AGB   I   Imprint

W822     1             Superba line TVP-2S, year 2003 : Dämpf- und Schrumpfmaschine

with creel for 48 cones, electronic sensors, frisebox MF

Specification:

 with creel for 48 cones, electronic sensors, frisebox MF,

 conveyor 260mm width, high pressure tunnel length 18,-m, temperature 100-150°C, 2 dryers type STV-3, accumulator MAT 4,5 m length, automatic control PEG/E2 Electro and REG/E2 Base, automatic winder Belmont type AD-3051, 24 spindles, 10" traverse, conic tubes 280mm,

 

The long tunnel of 18,-m has the advantage of 2  times longer residence

compared with a 9m tunnel. This fact allows to work with much higher production speed or lower temperature for wool, to get a good heat setting without yellowing. It is possible to shorten the tunnel easily about 3, 6, 9, 12 or 15 m by sections of 3 m.

380V/3PH/50Hz

V192 1 Superba yarn steaming and shrinking machine : Dämpf- und Schrumpfmaschine

very good condition, still in working position

Specification:

type Spirovap WPM/U, year ca. 1995,

with 10 conveyors, perforated stainless steel tapes,

steam heated 98°C, variable speed 300-600 m/min,

380V/3Ph/50Hz, very good condition, still in working position

linked with

1             Gilbos winder IDS-10 : Spulmaschine

12 spindles, 10” traverse, cylindrical tubes 280 mm,

meter counter, automatic doffer, conveyor fur full cones,

380V/3Ph/50Hz, very good condition, still in working position

 

SL115 vakuum steamer : Dämpfer

Xorella, 1989

Specification:

1 vakuum steamer: Dämpfer

Xorella, 1989, 4624 l, 4 bar, temperature 50-151°C,

diameter inside 1.400 mm, length 2.600 mm,

electric heating 4 x 25 kW,

Sihi-vakuumpumpe, automatic temperature control,

 still complete on floor.

V183 balling machine : Knäuelmaschine

Croon & Lucke, year ca. 1985 type KA1600, 16 spindles,

Specification:

Croon & Lucke, year ca. 1985 type KA1600, 16 spindles,

 including 1 set of 16 mandrels 85/44 for 50-100g balls,

 alternative mandrels for 25-50g balls

 special gear for parallel wounded balls

 still in production

W357 automatic balling machine : Knäuelmaschine

Ottko Germany, year 1983, type KW765, 16 spindles with:

Specification:

Automatic tubefeeder with conveyor, automatic tubefeeding on every spindle, automatic headdlabel

Transport on every spindletop, automatic doffing, 380V/50Hz, the spindles are prepared for tubes

Ø 50 mm inside and length 65 mm for balls 20-25 gr production 25-35 balls/minute, other tubes are

Possible by changing the spindletop

W358 automatic labeling-machine : Banderolier-Anlage

Ottko, year 1984

Specification:

Ottko, year 1984, type UM for automatic labeling balls, linked with W357 type KW765, automatic

Printing of Lot-Nr. on the labels, automatic glueing of labels with hotmelt., production: ca. 25-35

Lables/balls/minute, 380V/50Hz

V160 balling machine   Knäuelmaschine

Croon & Lucke, year ca. 1980

Specification:

Croon & Lucke, year ca. 1980, type K1600G, with 8 spindles

For Jumbo-balls 250-500 gr, also 100 gr possible

W681 balling machine : Knäuelmaschine

Croon & Lucke, year ca. 1981

Specification:

Croon & Lucke, year ca. 1981, type K160, 16 spindles, 16 mandrels 130/44, special gear for

Parallel wounded balls

V125 packing device : Packanlage

For hand knitting yarn

Specification:

For hand knitting yarn

W646 shade card machine : Farbkarten-Maschine

Fabr. Wagenfelder, Germany, year ca. 1995

Specification:

Fabr. Wagenfelder, Germany, year ca. 1995, system Mayer for shadecards maximum 200 mm

Width, with 2 heatingbars, temperaturecontrol, variable transport for different shade cards length,

Cutting device, all functions done by pneumatic cylinders and controlled by timers, simple handling.

Bonding of the yarnends on normal paper by liquid glue (Uhu) and 1 small stripe each shade card

And heatingbar.

W151a winder with accumulators . Spulmaschine mit Akkumulator

Croon & Lucke, year 1984

Specification:

Croon & Lucke, year 1984, type S 164, for 16 threads, for link with balling machine with 16 spindles

V184 winders from hank to cake Superba : Kuchenwickler

with 4 cake-spindles from hank or cone to cake

Specification:

with 4 cake-spindles from hank or cone to cake

HKN-Machines

Hattorfer Kammgarnspinnereien GmbH - Niederschmalkalden

Postfach 1161

D-49414 Wagenfeld / GERMANY

 

Tel. + 49 (0) 5444 501 47

Fax + 49 (0) 5444 800

 

E-Mail

Wagenfelder

Spinnereien GmbH

 

Maschweg 1 - 7

D-49419 Wagenfeld / Germany

 

Tel. + 49 (0) 5444 501-0

Fax + 49 (0) 5444 501-49

 

E-Mail

HKN-Machines

Hattorfer Kammgarnspinnereien GmbH - Niederschmalkalden

 

gegründet: 1832/1900 ein Unternehmen der Spinnereigruppe Wagenfeld seit 1988

IMPRINT    I    AGB    I    DATA PROTECTION  I  Wagenfelder.com